Overview
Thomaston Mills -T-180 White Sheets made of 50% Cotton / 50% Polyester. Thomaston sheets and pillowcases are designed to withstand the intensity of today’s commercial laundries. Many imports are unable to withstand the rigors of institutional laundering and tear, pill, change shade, and shrink excessively as a result. Don’t lose money by buying low-cost goods you need to replace frequently! Save money by using the lowest cost-of-use products available by Thomaston Mills!. Proudly manufactured in United States Of America.
Thomaston Mills was founded in 1899 by R.E. Hightower and is the oldest domestic sheet mill in the USA. We were owned by the Hightower family until 2001, and have been owned by the Zaslow family since that time. Combined the two families have over 200 years of textile experience. Thomaston Mills continues to operate as a family business that puts the customer first.
We currently specialize in manufacturing and distribution of the highest quality bed and bath linens to the hospitality, healthcare and institutional markets. We finish millions of yards of fabric each year at our bleachery in Easley, South Carolina and cut and sew this fabric in our 250,000 square foot manufacturing and warehousing facility located in Thomaston, GA.
At both our office headquarters in Wyncote, PA and factory in Thomaston, GA you will find a team of hard working professionals with unparalleled experience in making high value textiles that save our customers money and staying comfortable and attractive longer. Similarly, our line of imported towels is also engineered for long term value. We are the value leader in the institutional market and are proud of both our history and present.
Specifications:
-
50% Cotton/50% Polyester
-
Made in USAof domestic or imported greige fabric
-
Classic Single Pick Insertion Percale
-
10-15% Heavier than Most Imported T-180
-
Each Lot Carefully Inspected for Softness
-
Bright Whites and Colors Shade Controlled by Spectrophotometer
-
Best Value Luxury Percale
-
Enduring quality for Nursing Homes, Camps, Dormitories and Hospitals
-
GSA Compliant
Download T-180 Thomaston Spec Sheet
Measurement In Inches: (W x L x D)
DESCRIPTION | SIZE | |
Twin - Healthcare | 36 x 80" | 9" |
Twin XL - Healthcare | 36 x 84" | 9" |
Twin - Hospitality | 39 x 75" | 9" |
Twin XL - Hospitality | 39 x 80" | 9" |
Full XL | 54 x 80" | 9" |
Queen | 60 x 80" | 9" |
King | 78 x 80" | 9" |
Full XL | 54 x 80" | 12" |
Queen | 60 x 80" | 12" |
King | 78 x 80" | 12" |
Care Instruction:
Sheets manufactured by Thomaston Mills contain polyester and cotton fibers. The laundrycare instructions can vary depending on the equipment used by various laundries but shouldfollow the below listed guidelines.
-
Wash water temperatures will cause very little variation in shrinkage or color up totemperatures of 160 degreesF.
-
Optical brighteners havebeen added during the finishing process to both the cotton and polyester. Normal alkaline wash conditions are acceptable (pH of 9-10) and the addition of an optical for the cotton in the wash cycle is recommended to help maintain the white shade over repeated laundries. Chlorine, peroxide, or sodium perborate bleach can beused in moderate amounts. In all cases, the pH of the fabric should be brought back to 5.0-7.0 pH range prior to drying.
-
The use of an optical brightener is not recommended on dyed shades because of the apparent change in color caused by this addition.
-
Drying can be in a tumble dryer or on a mangle. The fabric shrinkage has been stabilized during manufacturing by the use of resin finish for the cotton and heatstabilization for the polyester. Goods are heat set to a minimum of 325 F at our finishing plant in Easley SC.
Caution:
-
If the fabric reaches this temperature during drying, excessive shrinkage canoccur. Many operations exceed these temperatures by trying to run hotter inorder to run faster. This will cause problems with shrinkage and color.
-
If drying in a tumble dryer, always use the cool down cycle prior to stoppingthe machine to prevent wrinkling.
NOTE:Tumble dryer temperatures should never exceed 300 degrees F. For thosecustomers who insist on running mangles above 300 degrees, very good success hasbeen achieved by taking the new (unwashed) sheet or pillowcase through the mangleat the temperature that it will be run one time dry before using it. This stabilizes thefabric at a higher temperature and when going into the mangle wet in future use theshrinkage is dramatically reduced.
The laundry chemical suppliers can recommend the most appropriate chemicals foruse in specific laundry equipment.